This beam apparatus is of a universal design for use in a wide range of beam experiments with simple, built-in and sinking supports ; measuring of point loads, measuring of support reactions, and beam deflections.
- The beam frame consists of an stainless steel angle upper cross member and two aluminum profile lower cross members, bolted to the support columns with footings.
- Three spring load cells with height adjustment and a cantilever support can slide along the lower members and can be clamped at any point.
- Dial indicators can slide along the upper member and can be clamped at any point.
- Linear scale is attached to the upper member to indicate the positions of load cells, loads, and supports and dial indicators.
- Load cell, weight hangers and dial gauges carriers have pointers to indicate their positions on the scale.
TYPICAL EXPERIMENTS
- Deflection of beams with two supports and various point loads.
- Determination of flexural rigidity and elastic modulus.
- Verification of static equilibrium.
- Verification of the bending equation M/I = E/R
- Beams with sinking supports.
- Statically indeterminate beam with different loadings and supports.
TECHNICAL DATA
- Supporting frame : Aluminum profile and stainless steel angle 1400 mm. long
- ST 124 Vertical force spring support: 3 ea 50 N x 0.1 N graduation.
- ST 112 Built-in knife edge support : 1 ea.
- Weight hangers : 4 ea
- Weights : 4x2N + 4x5 N + 8x10 N.
- Beam length : 1200 mm
- Beam materials
- Mild steel : 1 ea 6 (approx) x 20 mm, 4.5 (approx) x 20 mm, 3 (approx) x 20 mm.
- Aluminum and brass : 1 ea 6 (approx) x 20 mm.
- Dial gauges : 3 ea 0-20 mm range x 0.01 mm graduation.
-
Pedir Cotización
Dimensiones del embalaje: 0,25x1,6x0,9m. Peso Bruto: 70 kg